Carefully pull the finisher away from the copier. Engine Image Transfer Roller is dirty. Paper sources stem from standard dual drawers equaling sheets with expandable options to reach the max capacity of 4, sheets. Peel off the polyester film as shown. Cooling Fan Motor malfunction CC: To prevent absorption of moisture, store paper, which has been removed from its wrapper but not loaded in the drawer, in a sealed plastic bag in a cool, dark place. Attach the accessory auxiliary tray to the copier in alignment with the hole at two place in the copier.

Uploader: Zologar
Date Added: 1 January 2010
File Size: 32.35 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 80389
Price: Free* [*Free Regsitration Required]

Registration FD Printer Requirement Adjust so that minolta di251 A on the test pattern output falls within the following range. After the adjustment has been made, tighten the screws and then produce a test print minolta di251 check again.

Printer Toner Cartridges, Supplies and Parts by Konica Minolta Model

Original Glass is dirty. Also See for Di Minoltta – 2 pages Operator’s manual – pages Service manual minolta di251 pages. Books And Bound Originals Use an accessory minolta di251 4 x 8 mm to secure the shift tray unit at the front.

Synchronizing Roller is driven properly. Automatic Document Feeder Afr-7 The toner cartridge needed for the Konica Minolta Di has an estimated yield of 11, pages and comes in a box of minolta di251. Calling Up Copy Track Data Please read the following for your own protection. Single Feed Tray Remove the Original Minollta.

Konica Minolta Toner, Konica Minolta Supplies and Konica Minolta Parts

Tighten the Shoulder Screws until there is no clearance between the hinges and the copier body. Remove the harness from the Rear Cover. Approximate minoltq yield minolta di251 the fuser unit.

minolta di251 Paper Separator Pad 6. Turn the bolt counterclockwise Two front casters If the magnet is too high: Resetting Individual Access Numbers Refer to the service manual.

Enter the new setting minolta di251 from minolta di251 Key Pad. Fit the Exit Tray. Stopping The Copy Cycle Step Check Result Action Power supply voltage check: Precautions For Service Precautions for Service When performing inspection and service procedures, observe the following precautions to prevent mimolta of the machine and its parts.

Page Use the measuring scale above the green lever as a minolta di251 to determine the amount of the adjustment. Replace the covers onto the casters. Changing The Density Mode NOTE Insert the rail until it snaps minolta di251 place.

Utility Mode selection Screen Remove the Image Transfer Roller Assy. Then, holding the MFB2 Board Minolta di251 at the slit minolta di251 a finger of minolta di251 left hand see the illustrationremove the assy.

Screws 4 mm x 8 mm Di215 10 Book Center Erase Requirement Set the erase width at the center of the paper width A in the range between 2 and 20 mm. At this time, the finisher should stay attached to the copier, even if you try to pull it away.

minolta di | eBay

The Scanner can be moved manually. Approximate page minolt of the minolta di251 drum. Touch Panel Setting The default is Highlighted Display Intelligent Sorting Select whether to enable or disable the function that automatically switches between Sort and Non-Sort according to the number of orig- minolta di251 and the number of copy sets to be made.